Глобальное превосходное универсальное решение для трубопроводов
Bellow expansion joint is a compensation element, effective use of bellows telescopic body deformation, dimensional change in absorption pipeline, pipe, thermal expansion and contraction caused by pipeline transverse and angular displacement. It is mainly used for noise reduction and vibration reduction. It is widely used in modern industry.
Bellow expansion Joint is a compensation element, effective use of bellows telescopic body deformation, dimensional change in absorption pipeline, pipe, thermal expansion and contraction caused by pipeline transverse and angular displacement. lt is mainly used for noise reduction and vibration reduction.it is widely used in modern industry. About the material of bellow, we can do SS304,$S316, $S321 and SS310s etc, for working pressure,we can do PN16,PN25,PN32,PN40 etc. For working temperature,we can do.10-+300’C etc.And we can do OEM and ODM production for you.
1. It is used to eliminate the expansion and contraction caused by climate change or expansion or displacement caused by other reasons.
2. Reliable operation, compact structure, strong compensation ability and long service life of pipeline.
3.Feature :Absorbs angular movements in all planes,Restrains pressure thrust forces;Supports dead weight;Avoid twisting the bellows;No main anchors required
4.MaterialStainless Steelss304, $s316,ss321 and ss310s etc
5.Connection: Flange
6.Media Fluids,Gases,Steam,Powder
7.Nominal widths:DN20-DN3000
8.Operating temperature-20℃~450℃
9.Working Pressure :PN6, PN10, PN16, PN25
10.Приложение:Connect Pipe, Valve and Pump etc
11. The type, specification and pipeline configuration of the compensator should be checked before installation, and it must meet the design requirements.
12. For compensators with inner sleeves, care should be taken to ensure that the direction of the inner sleeve is consistent with the flow direction of the medium, and the hinge rotation plane of the hinge-type compensator should be consistent with the displacement plane.
13. A compensator that needs to be “cold-tightened”,and auxiliary components used for re-deformation should be removed after the pipeline is installed.
14. It is strictly prohibited to use the method of defomming the comugated compensator to adjust the installation tolerance of the pipeline, so as not to affect the nomal function of the compensator, reduce the service life and increase the load of the piping system, equipment, and supporting components.
